EnglishFrenchGermanItalianRussianSpanish

Sealed fiber optic terminal boxes shrink AD013

Sealed fiber optic terminal boxes shrink AD013's Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

Tags: , , ,
General Details
Sealed fiber optic terminal boxes shrink AD013’s Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

The scope of application is: aerial, underground, pipeline, handholes. The ambient temperature ranges from -40 to 65℃.

Basic structure and configuration

1 Dimension and capacity

Outside dimension (Height x Diameter) 490mm×220mm
Weight (excluding outside box) 3000 g— 3600g
Number of inlet/out ports 6 pieces in general (max. 6 pieces)
Diameter of fiber cable Φ8mm~Φ36mm
Capacity of FOSC Bunchy: 48-288 (cores), Ribbon: up to 864 (cores)

 

2 Main components

No. Name of components  Quantity  Usage Remarks
1 FOSC cover 1 piece Protecting fiber cable splices in whole Height x Diameter

400mm x 220mm

2 Fiber optic splice tray (FOST) Max.:5 trays (bunchy)

Max.: 5 trays  (ribbon)

Fixing heat shrinkable protective sleeve and holding fibers Suitable for:

Bunchy: 48(cores) Ribbon: 24 (pieces)

3 Base 1set Fixing internal and external structure
4 Plastic hoop 1 set Fixing between FOSC cover and base
5 Seal fitting 1 piece Sealing between FOSC cover and base
6 Pressure testing valve 1 set After inject air, it is used for  pressure testing and sealing testing Configuration as per requirement
7 Earthing deriving device 1 set Deriving metal parts of fiber cables in FOSC for earthing connection Configuration as per requirement

3 Main accessories and special tools 

No. Name of accessories Quantity Usage Remarks
1 Heat shrinkable protective sleeve Protecting fiber splices Configuration as per capacity
2 Nylon tie Fixing fiber with protective coat Configuration as per capacity
3 Heat shrinkable fixing sleeve (single) Fixing and sealing single fiber cable Configuration as per requirement
4 Heat shrinkable fixing sleeve (mass) Fixing and sealing mass of fiber cable Configuration as per requirement
5 Branching clip Branching fiber cables Configuration as per requirement
6 Earthing wire 1 piece Putting through between earthing devices
7 Desiccant 1 bag Put into FOSC before sealing for desiccating air.
8 Labeling paper 1 piece Labeling fibers
9 Special wrench 1 piece Tightening nut of reinforced core
10 Metal hoop 1 set For wall mounting and pole hugging
11 Buffer tube

 

decided by customers Hitched to fibers and fixed with FOST, managing buffer. Configuration as per requirement
12 Aluminum foil paper 1piece To protect the bottom of closure and inlet/outlet tubes when heating heat shrinkable fixing sleeve with fire sprays
Order Inquiry

We will contact you soon

  • 9 + 87 =
Comments

Leave a Reply

Your email address will not be published. Required fields are marked *