Aminite manufacture the LC/UPC Field Assembly Fiber Optic Fast Quick Connector. this Fast connector designed to be reused up tp 3 times, allowing you to re-seat the fiber and eliminate wasted materials due to incorrect termination or changes in your network.
FAST Connector are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers. FAST Connectors are compatible with 250 µm and 900 µm optical fibers, as well as 900 µm, 2 mm and 3 mm cordage.
All primary fiber types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation.
A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination. Incorporated into this device is an innovative,translucent wedge enabling the use of a common VFI to provide a “pass/fail” signal once physical contact is achieved.
- Premise/Enterprise Networks
- LAN/WAN Connections
- Patch Panels
- Equipment Termination
- FTTx Applications
- Field Repair/Replacement
- Equipment Test Leads
- No Epoxy, No Polish
- Low Insertion Loss
- Fiber Can Be Reinserted up to Three Times
- 3.0 mm, 2.0 mm and 900 μm Cordage Compatibility
- VFI Accessory to Confirm Proper Installation
- TIA/EIA-568-C.3 Compliant
- TIA/EIA-604 (FOCIS) Compliant
|Insertion Loss||Single-mode||Average: 0.2 dB, Maximum: 0.5 dB|
|Multimode||Average: 0.1 dB, Maximum: 0.5 dB|
|Return Loss @ Room Temperature (Single-mode)||Average: 56.4 dB, Maximum: 45 dB|
|Operating Temperature||–40°C to +75°C|
We will contact you soon